Shark Vacuum Brush Roll Indicator Light Not On: 7 Solutions

If you are also facing the shark vacuum brush roll indicator light not on issue, then this article is specially written for you.

There are lots of shark vacuum users who are facing the same issue. I know it is a common issue, but it is very irritating.

Shark robot vacuum cleaners provide you with a deep cleaning experience with advanced cleaning modes.

In this article, I am going to discuss with you why your shark vacuum brush roll indicator light is not on and how you will fix this issue at your home.

Let’s start the guide.

How To Solve Shark Vacuum Brush Roll Indicator Light Not On

Solve The Vacuum Overheating Issue
Clean The Hairs For Your Roller Brush
Change The Vacuum Cleaner Belt
Use The Right Vacuum Setting
Solve The Nozzle Attachment Issue
Change The Roller Brush
Full Charge Your Shark Vacuum

Solve The Vacuum Overheating Issue

Some new vacuum users are continuously using their shark robot vacuum cleaner too much time without giving it rest.

I strongly recommend you to avoid this mistake.

To Cool down your vacuum, follow these points-

Give your vacuum cleaner proper rest after use.
Don’t use your vacuum cleaner after disconnecting from the charger.
Don’t use your shark robot vacuum cleaner if your room temperature is hot.
Not use your vacuum for more than 30 minutes continuously
Don’t use your vacuum in high suction power mode if it is not needed.

Clean The Hairs For Your Roller Brush

Sometimes, when you vacuum the floors, chances are high that there are hairs stored in your vacuum roller brush.

As a result, the hairs are locked in your roller brush, so it is difficult to rotate the vacuum brush.

To clean the shark robot vacuum brush roller, you can follow these steps-

First of all, unplug the vacuum from the charger.
Now, separate the roller brush from the shark robot vacuum.
Now, use 4 to 5 drops of alcohol in the roller brush.
Take a smooth or soft cloth to clean the roller brush.
After cleaning it, reattach the roller brush to the vacuum cleaner.

We strongly recommend you follow this process twice a month. Cleaning your roller brush time to time It will give you with the best cleaning experience.

Change The Vacuum Cleaner Belt

Basically, a vacuum cleaner belt is made with rubber material, but it plays an essential role in vacuums because it is directly connected to a roller brush.

To solve the light issue, must change the vacuum belt if there are any breakage occurs. I always recommend you use the original vacuum belt instead of third-party local market belts.

To Changing the Vacuum belt, you can follow the below steps-

First of all, unplug the vacuum cleaner from the charger because safety is our first step.
Now, separate the vacuum belt by using any screwdriver.
After removing the old belt, place the new belt in it.
After placing the belt, fit the screwdrivers again.

Use The Right Vacuum Setting

In shark robot vacuum cleaners, the suction cleaning mode is used to clean the debris, and the normal cleaning mode is used to clean the floors.

If you are using the normal mode to clean the debris, then, in this case, you will face the roller brush not flashing light issue. To solve this issue, use the right vacuum setting.

Solve The Nozzle Attachment Issue

If the vacuum nozzle is not attached correctly to the shark robot vacuum cleaner, then you will face the not turning on light issue.

If the nozzle is loose, then it can’t able to generate the power properly.

To Solve vacuum nozzle issue, you can follow these steps-

First of all, switch off the shark vacuum cleaner.
Now, remove the bottom part of the vacuum cleaner.
Now check if the nozzle was not placed properly. Reattach the nozzle correctly.
After that, again, fit the bottom part and switch on the vacuum.

Change The Roller Brush

If your roller brush is a little bit old or there will be any damage that occurs, then I recommend you immediately change the beater bar.

When you clean the debris using your vacuum cleaner, chances are high that the sharp edges of the debris will damage your roller brush.

To solve the roller brush light not turning on the issue, change the roller brush.

Full Charge Your Shark Vacuum

As I already mentioned in my previous article, shark robot vacuums need a minimum charge to work properly.

If your shark vacuum has below the 30% charge, then chances are high that your roller brush light will not be turned on.

If your vacuum has below 30% charge, the vacuum automatically turns on the power saving mode so that the light is not turned on.

To solve this issue, you must fully charge your shark robot vacuum cleaner.

Why Shark Vacuum Brush Roll Indicator Light Not On?

Wrong Vacuum Setting
Vacuum Motor Issue
Broken Vacuum Belt Problem
Motor Over Heating Issue
Vacuum Brush Issue

Wrong Vacuum Setting

Some new vacuum users are always making this mistake. Mainly, there are two types of cleaning modes available in shark robot vacuum cleaners. The first one is suction cleaning mode, and the other one is brush roll mode.

Suction mode is used to vacuum the debris from normal floors, and on the other hand, the brush roll mode is used for vacuuming the normal dust.

If you are using the brush roll mode to vacuum the debris, then, in this case, your shark vacuum brush roll indicator is not flashing the light.

Vacuum Motor Issue

Most shark robot vacuum cleaners come with two inbuilt motors. One motor is used to generate the suction power for vacuuming, and another one is used to connect the brush roller.

If the vacuum has an issue or some technical error, then, in this case, your shark vacuum cleaner roller brush is not flashing the indicator light.

Mostly, this issue is happened with old vacuum cleaners because their vacuum motor needs to be changed.

Broken Vacuum Belt Problem

As you know, the shark robot vacuum cleaner roller brush is operated by a vacuum belt. The vacuum belt is made with high-quality rubber, and it helps to rotate the brush.

If there is any damage occurring with the belt, then this issue is happening to you. Mostly, this issue happens when there is any breakage occurs in the belt.

Motor Over Heating Issue

As I already mentioned in the above section, there are two motors that come with the Shark Robot vacuum cleaner.

If you are using your vacuum cleaner too much time, then the motor starts to overheat. As a result, your roller brush light indicator does not blink because the motor is connected to your roller brush.

Vacuum Brush Issue

You must check whether any hairs are stored in your vacuum brush or not. When you vacuum, there are some hairs stored in your vacuum roller brush, and it will make it difficult to rotate the brush.

It is also essential for you to clean your vacuum roller brush after every use. It will make your vacuum works fine.

Why Does The Shark Vacuum Roller Brush Start And Then Stop?

Well, if your vacuum roller brush starts and then stops after some time, then this issue is happening due to the damaged air filter or damaged roller brush issue.

You must check whether the roller brush is damaged or not. If the roller brush is damaged, then change the roller brush to solve this issue.

Also, if the vacuum filter is damaged or contains dust, then simply clean or change it to solve this issue. Don’t be worried because it is not a serious problem.

Shark Vacuum Headlights Not Working

Well, if you are facing the shark vacuum headlight not working issue, then its main reason is a damaged motor.

Because the motor is directly connected to the roller brush, if there is any issue caused by the motor, then the roller brush faces difficulties in rotating. As a result, your headlight has stopped working.

Now, The Main Question is how you can solve this issue. Well, for this, you will be visiting the shark robot customer service.

Always keep in mind that avoid any local repair shops.

Why Shark Brush Roll Indicator Flash Green But Not Spinning

Well, if your shark robot vacuum cleaner indicator flashes a green light, then it shows that your vacuum is now in working mode.

The vacuum roller brush works in a tilt-back position. If the green light is flashing, but your shark vacuum is not spinning, then you must check the roller brush position.

If it is not set in the tilt-back position, make it in the tilt-back position to solve this issue because the back position helps the roller brush to spin.

Where Is The Reset Button On My Shark Robot Vacuum?

Well, different shark robot vacuum cleaners have their reset button in different locations. But in most shark vacuum cleaners, the reset button is located on the top of the unit.

The reset button is used for resetting the vacuum cleaner. You will also reset the Shark vacuum cleaner using their Shark Clean Mobile application.

Shark Vacuum Overheated And Won’t Turn On

If this issue happens to you, then we strongly suggest that you use your vacuum cleaner only for 30 minutes continuously.

To address this issue, you can follow these points-
First of all, if the vacuum is overheated, then immediately turn off the vacuum and leave it for a minimum of 2 to 3 hours to cool down.
Only connect your charger sometimes.
Don’t use your vacuum for more than 30 minutes continuously.
Clean your vacuum filter.
Don’t use your vacuum cleaner if it has a low charge.

Also Read This Articles:

Hart Stick Vacuum Keeps Shutting Off

What Is A Vacuum Beater Bar?

Why Is My Lefant Vacuum Blinking Red?

Conclusion

This article is helpful for you. In this article, I will discuss with you seven proven ways you can solve the shark vacuum brush roll indicator light not on problem, and also I will discuss with you why this problem occurs. If you have any questions regarding this guide, you can comment on your query.